Capacitance
From 0.1 µF to 10,000 µF across the series line. Low values for coupling, high values for bulk smoothing.
Browse →Home / Products
Pick by the parameter that matters most to your design — load life, temperature, voltage or capacitance. Every series below is listed with the ratings published on our official site, and every one is built on our own wound elements and fully tested in-house.
Wide-temperature SMD aluminum electrolytic rated to +125 °C, built for high-frequency, low-impedance use in high-temperature applications.
Long-life SMD aluminum electrolytic with a wide capacitance range up to 8,200 µF for always-on equipment. Built to satisfy vibration-resistant requirements.
High-capacitance, ultra-low-impedance SMD aluminum electrolytic for compact, low-voltage designs and high-density board mounting.
Low-impedance SMD aluminum electrolytic — 30–50% smaller than the LHZ family — with wide voltage and capacitance coverage.
Miniature-case SMD aluminum electrolytic, 3.95 mm tall, for space-constrained portable and wearable boards. Rated 1,000 h at 105 °C.
High-voltage, long-life SMD aluminum electrolytic for mains-side and off-line circuits, with a wide operating-temperature range.
Each application lists the LH series our engineers recommend first — then confirm the exact rating on the datasheet.
Switching equipment, routers, modems and access terminals that need stable bulk capacitance around the clock.
Body electronics, lighting and cabin modules with wide ambient swings.
Power supplies, inverters, LED drivers and control boards that run hot and long.
Audio, small appliances and portable devices where size and cost matter.
Load life, operating temperature, rated voltage and capacitance — across 25 series they run from 1,000 h to 8,000 h, −55 °C to +125 °C, 4 V to 450 V and 0.1 µF to 10,000 µF.
From 0.1 µF to 10,000 µF across the series line. Low values for coupling, high values for bulk smoothing.
Browse →From 4 V to 450 V. The JVD, LHJ and LHK families cover the 160–450 V high-voltage band.
Browse →−55 °C to +125 °C. LHA, LHU, LHV and LHW carry the +125 °C upper limit for high-temperature use.
Browse →From 1,000 h to 8,000 h at rated temperature. LHK reaches 8,000 h; LHO, LHA and LHU are rated at 1,000 h.
Browse →